Recent Posts

1

Break Room / Re: Break the silence !

« Last post by Dave on March 27, 2024, 08:31:53 AM »

Bunch of new members but not many post...

2

Break Room / Re: Break the silence

« Last post by maccrazy2 on March 21, 2024, 01:17:24 AM »

Hey it posted. I started 3 Gatlings a few years ago with the intention of them being long term projects. Made some good progress at the time and am getting ready to pull them off the shelf and start the next little bit of work before I have to put them back on the shelf again. I was having problems being able to post anything on the form on my phone or tablet after a change or update to the form at that time. I was reading but unable to reply and kind of drifted away from the site.
Not sure why but it is working again now. Happy to be able to interact here again.

3

Break Room / Re: Break the silence !

« Last post by maccrazy2 on March 21, 2024, 01:05:19 AM »

Hello everyone. This is a test post to see if it will work.

4

D&E Specific / Re: D&E build

« Last post by Hittman on March 10, 2024, 12:13:15 PM »

The e mail roller I noticed is wrong its donhitt@gmail.com i did see your you tube video amazing work

5

D&E Specific / Re: D&E build

« Last post by Hittman on March 10, 2024, 11:44:08 AM »

Thanks fir replying roller i would sure like to be able to talk with you about your experience with the build if you would it would be greatly appreciated you can contact me at dinhitt@gmail.com  or call 360 770 3289 iam readying all the coments here and gathering materials and would just like to talk a little bit about your build thanks hope to hear from you

6

D&E Specific / Re: D&E build

« Last post by Roller on March 09, 2024, 03:59:46 PM »

I built the D&E several years ago and made a YouTube video of it.  There were many discussions in past posts of all the problems with the design.  Review the posts to answer some of your questions.  I haven't been on this site in a while and just happened to see your post. 

Frank

7

D&E Specific / D&E build

« Last post by Hittman on March 02, 2024, 04:57:21 PM »

Is there any one on this forum building or ave built the D&E gun to date thanks would like to hear from someone

8

D&E Specific / Re: D&E Plans Errors and Omissions

« Last post by Hittman on March 02, 2024, 04:54:49 PM »

Are the dimensions off from the front of the bolt lug to the end of the extractor

9

D&E Specific / Re: D&E Gatling Gun Firing Pins

« Last post by Hittman on March 01, 2024, 08:06:23 PM »

Frank i would sure like to talk to you about your build iam going to be starting

10

General RGG Guns/ Homebrew gats / Open source (3d printed) Mini gun

« Last post by Dave on February 19, 2024, 05:24:49 PM »

Figured it was worth a share...


https://www.youtube.com/watch?v=uC36sE5Yxfg

https://www.reddit.com/r/fosscad/comments/18fs5to/m1337_first_fully_functioning_range_test/


On Reddit they said roughly $1K to build.

$300 of which is the bearing.