Gatlinggunforum

General Category => Progress => Topic started by: Richard Morton on March 06, 2022, 10:20:29 PM

Title: My Bolt Project
Post by: Richard Morton on March 06, 2022, 10:20:29 PM

After some false starts making some solid progress on the bolts and the end is in sight.  Based on Cutter's design and with a shout to him for the help!

Title: Re: My Bolt Project
Post by: Richard Morton on March 10, 2022, 09:04:06 PM

Turning out pretty nice, I think.  Have about 150 in progress.

Title: Re: My Bolt Project
Post by: Richard Morton on March 18, 2022, 06:22:03 PM

This batch is done and ready to be completed.  Simple mill drill operations.

Title: Re: My Bolt Project
Post by: Dave on March 23, 2022, 04:56:22 PM

Thats AWESOME!

Title: Re: My Bolt Project
Post by: Richard Morton on March 28, 2022, 07:24:54 PM

Fifty, one-piece bolts from 303 SS are for sale.  Based on Cutters' bolt and these would not have been possible without this help.  These are dimensionally RG-G ready and await the internal matching (firing pin hole, extractor slot, and details, and pivot hole for extractor and recess for firing pin. spings, extractor, firing pin, and hammer not included.  $55 each.   

Fully completed bolts less spings, extractor, firing pin, and hammer.  $85 each.  Bolt caps are $10 each. Extractor spring $1.50 each, Hammer spring $1.50 each.  Limited quantity and no concrete plans to run more than this batch of fifty partial and fifty fully machined bolts.  Note on 6-24-2022 revised pricing.   More info (630) 325-2022