Gatlinggunforum

General Category => Q & A => Topic started by: drhardin on April 28, 2021, 09:00:20 AM

Title: Ruger Extractor Details
Post by: drhardin on April 28, 2021, 09:00:20 AM

I got a set of Ruger style extractors from Gary (RIP) but never received the drawing for machining the bolts for the extractors. Does anyone out there have a drawing that shows the dimensions for the extractors Gary had made that they could send me? Thanks Much!

Title: Re: Ruger Extractor Details
Post by: Sparky_NY on April 28, 2021, 07:06:12 PM

Cutter was the person who first used the ruger extractors.    He did a bunch of posts here on the forum showing it along with drawings/dimensions.   Search around and you should find the info.

Title: Re: Ruger Extractor Details
Post by: drhardin on April 28, 2021, 09:31:46 PM

I was not sure if the ones Gbull had made were identical to Cutter's. If so I will search for the posts. Do you know if the ones from the group build were the same. Thanks for your help.

Title: Re: Ruger Extractor Details
Post by: Sparky_NY on April 29, 2021, 06:45:47 PM

Cutter was the first to use ruger extractors and I believe all the ones that followed were based on his original drawing.    Not 100% sure of this, but maybe 95%

Title: Re: Ruger Extractor Details
Post by: drhardin on April 29, 2021, 09:06:48 PM

Thanks Sparky, I'll do some searching and see what I can find.

Title: Re: Ruger Extractor Details
Post by: 20Gun on April 30, 2021, 08:34:52 PM

I have the drawings that G Bull sent me with the sets of the extractors. If you  PM me your address I can mail  you a copy. G Bull said the drawings were made by Rayhawk. Better chance of me piloting the space shuttle than trying to scan on a computer.

Title: Re: Ruger Extractor Details
Post by: drhardin on May 01, 2021, 07:43:47 AM

I sent you a pm. Thanks