Gatlinggunforum

General Category => D&E Specific => Topic started by: on March 18, 2012, 06:10:12 PM

Title: cams
Post by: on March 18, 2012, 06:10:12 PM

I placed my cams into the body, at 135 degrees. The first cam in,the front one, looks good, the ramp starting just past 6 o\'clock, to start extraction. The rear cam, at 135 degrees, starts to move the bolt forward at about 2 o\'clock, which seems pretty good. Here\'s my problem, the high flat at .900, falls short of coming down to 6 o\'clock to hold the bolt in at 6 o\'clock under fire. The high flat stops at around 5 o;clock.  Help, and thank you, Paul

Title: cams
Post by: on March 18, 2012, 06:53:36 PM

Paul,

Your timing sounds right , mine fires at 4 oclock  and then drops off the ramp.

Frank