« previous next »
Pages: [1]

Author Topic: 1 piece Items  (Read 2247 times)

Offline dburn

  • Newbie
  • *
  • Posts: 0
1 piece Items
« on: February 25, 2017, 04:25:07 PM »
I try to make everything that I can as 1 piece
Logged

Offline Cutter

  • Hero Member
  • *****
  • Posts: 1174
1 piece Items
« Reply #1 on: February 25, 2017, 05:28:12 PM »

Great idea Dave


Logged

Offline Kmilner65

  • Newbie
  • *
  • Posts: 0
1 piece Items
« Reply #2 on: May 11, 2017, 08:49:12 AM »
Are you running a cnc I am looking into a small mill turn and wondering if it is worth the money
Logged

Offline maccrazy2

  • Full Member
  • ***
  • Posts: 229
1 piece Items
« Reply #3 on: May 03, 2019, 03:57:54 PM »
I’m looking into the one piece assembly. Is there a commercially available keyway cutter that would work to produce the slot? I’m not that far along yet but if a custom one is needed I will start working on getting one made so I’m ready when the time comes. Other thought is possibly turning the slot on a lathe using a trepaning type tool of sorts.
Logged

Offline Cutter

  • Hero Member
  • *****
  • Posts: 1174
1 piece Items
« Reply #4 on: May 03, 2019, 08:39:36 PM »
I use a standard Woodruff key cutter ( # 302 1/2 )

just relieve the shank enough to clear the slot between

the recoil points

Logged

Offline maccrazy2

  • Full Member
  • ***
  • Posts: 229
1 piece Items
« Reply #5 on: May 03, 2019, 08:57:17 PM »
Thanks. I will order one on my next tool order. I have a toolpost grinder so relieving the shank is no problem.
Logged

Offline Cutter

  • Hero Member
  • *****
  • Posts: 1174
1 piece Items
« Reply #6 on: May 03, 2019, 09:27:12 PM »
If you make one blank , 2.500 OD X 1.500 ID

1.500 long , you can get three cocking rings

Logged

Offline maccrazy2

  • Full Member
  • ***
  • Posts: 229
1 piece Items
« Reply #7 on: May 03, 2019, 10:30:22 PM »
Nice. I have to let you know the reason I am taking the plunge and starting on this project is the info and photos you and a couple other guys have shared. I greatly appreciate all your help. The modifications and methods you have done really make a working gun attainable. After buying the plans and reading the old forum posts I was deterred because of all the posts where people followed the plans and the guns were quite unreliable.

A big thanks to Cutter!
Logged

Offline 4171

  • Newbie
  • *
  • Posts: 124
1 piece Items
« Reply #8 on: May 04, 2019, 09:40:48 AM »


Nice. I have to let you know the reason I am taking the plunge and starting on this project is the info and photos you and a couple other guys have shared. I greatly appreciate all your help. The modifications and methods you have done really make a working gun attainable. After buying the plans and reading the old forum posts I was deterred because of all the posts where people followed the plans and the guns were quite unreliable.

A big thanks to Cutter!





Plus one for Cutter!
Logged

Offline maccrazy2

  • Full Member
  • ***
  • Posts: 229
1 piece Items
« Reply #9 on: May 04, 2019, 11:10:25 PM »
What grade of metal do you recommend. I was looking at online metals and they have Mild Steel Round Tube A513-Type 5 Dom

in that size. I didn\'t see another alloy there in that size
Logged

Offline Cutter

  • Hero Member
  • *****
  • Posts: 1174
1 piece Items
« Reply #10 on: May 07, 2019, 03:25:42 PM »


What grade of metal do you recommend. I was looking at online metals and they have Mild Steel Round Tube A513-Type 5 Dom

in that size. I didn\'t see another alloy there in that size




 


The tube will ok for a .22

With .002/.005 movement at recoil, it’s not going to be hammering on it
Logged
Pages: [1]
« previous next »