Author Topic: Cutters bolts wanted. (Read 14747 times)

Cutter · « **Reply #20 on:** January 23, 2019, 04:59:58 PM »

I just got a reply, the were asking for an STP file for the bolts. I did not get ahold of the guy yet. Anyone familiar with stp? I have not heard of that extension before.

Itâ€™s a STEP file from SolidWorks

maccrazy2 · « **Reply #21 on:** January 24, 2019, 03:18:14 PM »

Is that a solid model?

Cutter · « **Reply #22 on:** January 24, 2019, 03:24:46 PM »

Is that a solid model?

Yes Sir

Cutter · « **Reply #23 on:** January 24, 2019, 07:17:39 PM »

I just got a reply, the were asking for an STP file for the bolts. I did not get ahold of the guy yet. Anyone familiar with stp? I have not heard of that extension before.

Hereâ€™s the Bolt model in .step & .iges

Good luck

maccrazy2 · « **Reply #24 on:** January 24, 2019, 09:47:06 PM »

Thanks Jerry. I run a couple CNC machines but am limited in my knowledge of programming to what I learned for building cues and basic programming for them.

Cutter · « **Reply #25 on:** January 25, 2019, 12:59:34 PM »

For what itâ€™s worth,

Hereâ€™s my sketch of the bolt blank for the lathe.

I double ended the blanks as shown using 3/4 stock material.

maccrazy2 · « **Reply #26 on:** January 25, 2019, 02:22:34 PM »

I will see what kind of price the give me (ballpark) and see it itâ€™s worth having some made.

maccrazy2 · « **Reply #27 on:** January 25, 2019, 02:24:09 PM »

I saw the extractor cuts were not on the modeling. I will have them add those also. I have the measurements written down at home. I will verify them with you before if you donâ€™t mind.

maccrazy2 · « **Reply #28 on:** January 25, 2019, 02:29:57 PM »

This is what I have

Cutter · « **Reply #29 on:** January 25, 2019, 03:25:07 PM »

I saw the extractor cuts were not on the modeling. I will have them add those also. I have the measurements written down at home. I will verify them with you before if you donâ€™t mind.

Do whatever you want.

I sold the bolts without any extractors.

There are many extractor ideas in the GG world.

maccrazy2 · « **Reply #30 on:** February 19, 2019, 02:48:01 PM »

I forgot to post. I heard back but havenâ€™t received the quote yet. I need to get them all the specs. I could of sworn I sent them with the rendering but I guess not. I will try to send them this week. Itâ€™s crazy busy getting ready for a cue show next month.

I plan on starting my build after that show so I will have a lot more time to devote to this project then. I will post when I get the price.

Cutter · « **Reply #31 on:** February 28, 2019, 01:26:00 PM »

For what itâ€™s worth, on my first batch of bolts with caps.

10 bucks each was a quote for the CNC lathe work for a

quantity of 150 , material included.

From a young man with the machine in his garage , a

few years ago.

Cutter · « **Reply #32 on:** March 19, 2019, 07:31:58 PM »

How many sets of Bolts are wanted ?

Lets get a count over the next 3 to 4 weeks.

maccrazy2 · « **Reply #33 on:** March 20, 2019, 01:14:05 AM »

I would be interested in 2-3 sets.

Bluedog · « **Reply #34 on:** March 20, 2019, 11:32:36 PM »

I would be interested in 2 sets.

Cutter · « **Reply #35 on:** March 23, 2019, 03:01:49 PM »

How many sets of Bolts are wanted ?

Lets get a count over the next 3 to 4 weeks.

Just keeping this active

beginner · « **Reply #36 on:** March 26, 2019, 06:52:18 AM »

I have part of a gun that I want to sell which includes cutters bolts and several other parts he made I am not going to finish and it would be a great start for someone

maccrazy2 · « **Reply #37 on:** March 26, 2019, 02:20:48 PM »

Beginner. I sent you a message. I am interested

gbull · « **Reply #38 on:** March 31, 2019, 01:31:15 AM »

I would be interested in 35 assemblies

maccrazy2 · « **Reply #39 on:** March 31, 2019, 08:12:32 PM »

News:

Author Topic: Cutters bolts wanted. (Read 14747 times)