Author Topic: New Bolts (Read 9451 times)

4171 · « **Reply #60 on:** July 16, 2019, 11:23:28 PM »

I would be in for extractors too. Iâ€™m not sure but I think the spring and plunger is a stock Ruger part.

Mike

gbull · « **Reply #61 on:** July 17, 2019, 12:34:55 AM »

They may be, but in bulk the springs are probably only a buck, and the plunger is really a simple turning job.

drhardin · « **Reply #62 on:** July 17, 2019, 07:43:02 AM »

I am in for the extractors and springs. I have a complete gun which I built using Cutters bolts with the RGG extractors. Thinking how we could use it to test functionality.

gbull · « **Reply #63 on:** July 17, 2019, 10:17:50 AM »

It would need the proper clearance cut in the barrel to clear the roger style extractor. I guess it would depend how clearance you gave your barrels.

maccrazy2 · « **Reply #64 on:** July 17, 2019, 11:22:31 AM »

In for the springs as well. The plungers would be easy to turn

gbull · « **Reply #65 on:** July 24, 2019, 08:24:03 PM »

So far so good. Now to see how it fits the sample bolt I have. The price should be around $4.10 ea. These are made from cutterâ€™s dxf file. Still need to source the firing pins.

maccrazy2 · « **Reply #66 on:** July 25, 2019, 09:21:53 AM »

McMaster carr has the mold pins for firing pins

4171 · « **Reply #67 on:** July 25, 2019, 12:39:56 PM »

McMaster carr has the mold pins for firing pins

What is the part number?

Thanks

Mike

maccrazy2 · « **Reply #68 on:** July 25, 2019, 02:38:31 PM »

I will look tonight. I believe I have it written down at home

gbull · « **Reply #69 on:** July 25, 2019, 03:38:48 PM »

They do have pins. They do need to have the heads ground down on the dia. and thickness. I was hoping to find some with smaller heads.

maccrazy2 · « **Reply #70 on:** July 25, 2019, 07:53:10 PM »

I have have a toolpost grinder if need be

4171 · « **Reply #71 on:** July 25, 2019, 07:58:22 PM »

Gbull let me know if you find some

Mike

Roller · « **Reply #72 on:** July 26, 2019, 08:05:59 AM »

They do have pins. They do need to have the heads ground down on the dia. and thickness. I was hoping to find some with smaller heads.

Heads on ejector pins and core pins are annealed and can be machined easily.

Frank

maccrazy2 · « **Reply #73 on:** July 26, 2019, 10:38:49 AM »

This is the measurements I have. I thought I had written down the part number but I seem to remember discussing machining first and buying the pins after to achieve the desired fit.

Cutter · « **Reply #74 on:** July 26, 2019, 11:33:05 AM »

This is what I used, from McMaster-Carr

4171 · « **Reply #75 on:** July 26, 2019, 12:52:39 PM »

Thanks Jerry!ðŸ‘

News:

Author Topic: New Bolts (Read 9451 times)