Author Topic: I made a part (Read 2388 times)

Dave · « **on:** December 22, 2011, 07:06:44 PM »

First part I have made since the new shop. A much needed dial indicator for my compound! ok I made 2 parts for it!

[attachment=9528:IMAG0586 (Large)-id=591.jpg]

« **Reply #1 on:** December 22, 2011, 07:08:16 PM »

Nice, I have the same lathe. Care to post sketches?

Dave · « **Reply #2 on:** December 22, 2011, 07:32:17 PM »

Real simple, I will get you one later tonight or tomorrow.

« **Reply #3 on:** December 22, 2011, 07:45:04 PM »

[quote name=\"Dave\"]Real simple, I will get you one later tonight or tomorrow.[/quote]

No hurry, just curious........and lazy.

Dave · « **Reply #4 on:** December 22, 2011, 07:55:53 PM »

I whipped this out on paint real fast, any questions, holler

Make sure you put around .300 in between those holes. It will hit the top of the slide just perfect! And you have to grind or mill the lug off of the back of the dial indicator! And remove the ball from the end of it!!!

You could get fancy and sink those Allen heads in too!

CRUDE DRAWING!

[attachment=9529:block-id=600.JPG]

News:

Author Topic: I made a part (Read 2388 times)