« previous next »
Pages: [1] 2 3 4

Author Topic: Gear Driven Magazine  (Read 11911 times)

  • Guest
Gear Driven Magazine
« on: January 27, 2012, 06:47:49 PM »

I have a good working Prototype

Only a couple of bugs to work out


Cutter


 


[attachment=9273:Proto Front-id=714.JPG]


 


[attachment=9274:Proto 70 Rounds-id=715.JPG]


« Last Edit: December 23, 2014, 08:14:38 PM by Dave »
Logged

  • Guest
Gear Driven Magazine
« Reply #1 on: January 27, 2012, 06:55:10 PM »
Pretty Slick!
Logged

  • Guest
Gear Driven Magazine
« Reply #2 on: January 27, 2012, 07:14:34 PM »
Very nice, will it fit on an D&E?

Frank
Logged

  • Guest
Gear Driven Magazine
« Reply #3 on: January 28, 2012, 12:51:05 AM »
Sweet! :D
Logged

  • Guest
Gear Driven Magazine
« Reply #4 on: January 28, 2012, 01:07:19 PM »
Great job cutter, that is amazing.
bruski
Logged

  • Guest
Gear Driven Magazine
« Reply #5 on: January 28, 2012, 08:35:10 PM »
Thanks for the Kudos Guys

I don\'t about the D&E Roller
Logged

Offline Dave

  • Site Admin
  • Administrator
  • Hero Member
  • *****
  • Posts: 859
Gear Driven Magazine
« Reply #6 on: January 28, 2012, 09:46:24 PM »
That is slick, you have skills :mrgreen:

Im sure something could be made to adapt it to a d&e...
Logged

  • Guest
Gear Driven Magazine
« Reply #7 on: February 07, 2012, 05:53:29 PM »
Bugs removed and ready to build.
The 50 round version is my choice, runs smooth.
When I have time I\'ll post some .dxf files.
Logged

  • Guest
Gear Driven Magazine
« Reply #8 on: February 07, 2012, 06:25:01 PM »
Really feeds nicely, fies would be apprecated!

nitewatchman
Logged

Offline Dave

  • Site Admin
  • Administrator
  • Hero Member
  • *****
  • Posts: 859
Gear Driven Magazine
« Reply #9 on: February 07, 2012, 07:11:40 PM »
Files are good :mrgreen:  Is the inside of that mag made from Delrin?
Logged

  • Guest
Gear Driven Magazine
« Reply #10 on: February 11, 2012, 12:20:32 PM »
As I build the Magazines, I will post .dxf files with description for anyone.

Material-  Brass 230 Schedule 40 pipe 4.5 OD X 4.02 ID
6 ea   2-56 holes X  .300 deep 2 sides
2 ea   .126 holes X .250 deep slip fit for .125 dowel  2 side

Between the Lathe and Mill operation, I recommend cleaning
the part and putting in your home oven. 350 degrees for 3 hours.
(Stress relieve / Anneal.)
Logged

  • Guest
Gear Driven Magazine
« Reply #11 on: February 11, 2012, 01:28:12 PM »

The Front & Rear Adapters have the same periphery and step.

2 ea .125 holes for light press (dowels)

2 ea clearance holes for 2-56 flat head


The Front is countered bored & reamed for the Feed Gear

The Rear, 8-32 thread


 


[attachment=9275:MVC-001F-id=772.JPG]


« Last Edit: December 23, 2014, 08:15:43 PM by Dave »
Logged

  • Guest
Gear Driven Magazine
« Reply #12 on: February 12, 2012, 03:19:31 AM »
That thing is so sweet.  Nice Job!!!

Glad to see you back Cutter.   :D
Logged

  • Guest
Gear Driven Magazine
« Reply #13 on: February 13, 2012, 12:18:30 PM »

Here\'s the Front Cover Plate .05 thk.

All clearance holes


 


[attachment=9276:MVC-007F-id=784.JPG]


[attachment=9277:MVC-005F-id=783.JPG]


[attachment=9278:MVC-001F-id=782.JPG]


« Last Edit: December 23, 2014, 08:16:56 PM by Dave »
Logged

  • Guest
Gear Driven Magazine
« Reply #14 on: February 14, 2012, 03:01:04 PM »

Rear Cover Plate .05 thk.


 


[attachment=9279:MVC-010F-id=795.JPG]


 


[attachment=9280:MVC-011F-id=794.JPG]


 


 


« Last Edit: December 23, 2014, 08:17:40 PM by Dave »
Logged

  • Guest
Gear Driven Magazine
« Reply #15 on: February 15, 2012, 06:40:16 PM »

This is the black Delrin Insert with four 2-56 and four 4-40 by 1/2 deep.

Holes matching up with the Front Cover Plate.

.945/.950 Thick


 


 


 


« Last Edit: December 23, 2014, 08:18:13 PM by Dave »
Logged

  • Guest
Gear Driven Magazine
« Reply #16 on: February 16, 2012, 04:40:15 AM »
Well the insert being made from delrin I should be able to make that on my CNC router.  :)
Logged

  • Guest
Gear Driven Magazine
« Reply #17 on: February 16, 2012, 09:22:05 AM »
Really nice work.  This is loaded through the holes in the coverplate, right?  I\'ll have to engrave the number of rounds on each so I remember ;)
Logged

  • Guest
Gear Driven Magazine
« Reply #18 on: February 16, 2012, 12:14:27 PM »
Yes Shred, Through the cover plate.
The inside channels hold 10, outside 15
Logged

  • Guest
Gear Driven Magazine
« Reply #19 on: February 16, 2012, 08:19:07 PM »

The other Delrin part ( Geared Feed Wheel )


 


[attachment=9282:MVC-003F-id=805.JPG]


« Last Edit: December 23, 2014, 08:18:52 PM by Dave »
Logged
Pages: [1] 2 3 4
« previous next »