Author Topic: New Firing Pin (Read 2207 times)

dburn · « **on:** February 22, 2017, 09:03:06 AM »

This is a new firing pin design. Works good. Fired 250 times so far with out a hitch.

Cutter · « **Reply #1 on:** February 23, 2017, 03:59:56 PM »

Hey Dave,

Can you explain just how your pin works ?

dburn · « **Reply #2 on:** February 23, 2017, 04:59:59 PM »

This is not new. I did it more than 10 years ago . Put the pin in the bolt and assemble it. I did this about the time I made the bolts in one piece and redid the extractors The prints were really bad as to construction methods. I made a LOT of other changes. The original prints were dated 1994 and a newer set were dated 2005.

DonLans · « **Reply #3 on:** February 24, 2017, 08:03:11 AM »

But, how does it work?

dburn · « **Reply #4 on:** February 24, 2017, 03:37:09 PM »

Works Great

Cutter · « **Reply #5 on:** February 24, 2017, 04:14:12 PM »

Dave,

How about a picture of the hammer ??

dburn · « **Reply #6 on:** February 25, 2017, 03:58:42 PM »

This what I have

dburn · « **Reply #7 on:** February 25, 2017, 04:01:29 PM »

This what have done[attachment=10485:DSC02507.JPG]

Cutter · « **Reply #8 on:** February 25, 2017, 05:36:23 PM »

Thanks Dave !

gbull · « **Reply #9 on:** February 26, 2017, 02:29:31 AM »

Looks like a good idea. Keeps the pin from rotating too doesn\'t it. I have been thinking of using a straight pin with a head that is drilled for the pin on the face out at the edge instead of the counterbore for a piercing punch. The head would be a slip fit for the deep hole in the bolt The goal is to have a firing pin that can\'t rotate so the striking end can be chisel pointed, and stay oriented. I\'ll let everyone know when I get that far.

Cutter · « **Reply #10 on:** February 26, 2017, 01:34:47 PM »

This is what I used for the Six Shooters.
I moved the firing pin hole out closer to the cartridge rim and relieved
the center, leaving a .015 ridge.

dburn · « **Reply #11 on:** February 27, 2017, 08:27:38 AM »

Hi Cutter, Good Idea

News:

Author Topic: New Firing Pin (Read 2207 times)