Author Topic: 10-22 Split Receiver (Read 4262 times)

Cutter · « **on:** December 14, 2017, 07:59:45 PM »

After taking a break from building GG\'s
I came up with this split receiver project\' just because.

[attachment=10506:001.JPG][attachment=10507:002.JPG

Sparky_NY · « **Reply #1 on:** December 14, 2017, 10:30:00 PM »

Beautiful work as always ! Its also nice to see a post on the forum, it has been far too quiet far too long.

Cutter · « **Reply #2 on:** December 15, 2017, 11:08:51 AM »

Thanks Sparky,
Now, on to more important builds, whatâ€™s up
with your RDEGG build ?
That build was looking great last time

Sparky_NY · « **Reply #3 on:** December 15, 2017, 12:19:34 PM »

Thanks Sparky,

Now, on to more important builds, whatâ€™s up

with your RDEGG build ?

That build was looking great last time

Funny you ask, I resumed the project a couple days ago after taking a break for the summer. Cut the T slot in the completed cocking mechanism and switch. Probably going into shop today and fit it in the gun. That will get me extremely close to test firing on a single shot basis.

I have been considering 3d printing a prototype drum magazine and top cover. Seems like a good use for the 3d printer.

Cutter · « **Reply #4 on:** December 15, 2017, 02:57:12 PM »

Great idea, printing technology is rapidly improving.

My stepson is printing an old ship, ( Santa Maria 1492 )

Cutter · « **Reply #5 on:** December 15, 2017, 03:20:13 PM »

Bench Test

https://www.youtube.com/watch?v=v28UkCEVE-0

Sparky_NY · « **Reply #6 on:** December 24, 2017, 06:27:33 AM »

Great idea, printing technology is rapidly improving.

My stepson is printing an old ship, ( Santa Maria 1492 )

That ship looks fantastic ! Is that \"wood\" filament he is printing with? I have read about wood filament but am a total novice when it comes to any 3d printing yet.

Cutter · « **Reply #7 on:** December 24, 2017, 11:31:53 AM »

That ship looks fantastic ! Is that \"wood\" filament he is printing with? I have read about wood filament but am a total novice when it comes to any 3d printing yet.

Yes it is Sparky

lawman1331 · « **Reply #8 on:** December 24, 2017, 03:43:49 PM »

Cutter,

Looks like stepson is as talented as you!

Mike

lawman1331 · « **Reply #9 on:** December 24, 2017, 03:44:38 PM »

Merry Christmas everybody!

Mike

4171 · « **Reply #10 on:** January 01, 2018, 02:35:48 PM »

Happy New Year!

Mike

Cutter · « **Reply #11 on:** January 04, 2018, 01:07:48 PM »

Quite Please !

Cutter · « **Reply #12 on:** January 05, 2018, 12:16:28 PM »

Quite Please !

I got this from a guy, who got it from a guy, who got it from another guy.

So I take this thing apart and all the baffles are ripped and torn, but the exit

bore in the end hasn\'t been touched. It looked like someone tried to use it,

but the slug never came out. BOOM

Iâ€™m not using it, itâ€™s just setting there for the picture.

Dave · « **Reply #13 on:** January 06, 2018, 11:07:13 PM »

Thats a long dude for a 22.... Be careful with that thing

News:

Author Topic: 10-22 Split Receiver (Read 4262 times)