Author Topic: Lockdown (Read 2785 times)

Cutter · « **Reply #20 on:** May 22, 2020, 04:38:45 PM »

That is pretty cool. What type of material is the yoda made from?

bruski

Oil-filled Nylon

Dave · « **Reply #21 on:** May 22, 2020, 08:04:43 PM »

Do or do not. There is no try...

What was the run time on that? And how big is it? Just curious....Very cool, BTW!

Cutter · « **Reply #22 on:** May 22, 2020, 08:15:48 PM »

What was the run time on that? And how big is it? Just curious....Very cool, BTW!

3â€ ear tip to ear tip

not sure of the run time, he finished in one day

plus I had a little puter time.

4171 · « **Reply #23 on:** May 23, 2020, 05:57:51 PM »

Very cool Jerry! What machine are you using?

Mike

Cutter · « **Reply #24 on:** May 24, 2020, 10:06:53 AM »

Very cool Jerry! What machine are you using?

Mike

My grandson has taken over my small 4 axis CNC mill

Heâ€™s going to practice on a RG-G Cam next week

Cutter · « **Reply #25 on:** May 25, 2020, 03:54:10 PM »

Heâ€™s naming this one ( Kovid )

Cutter · « **Reply #26 on:** May 27, 2020, 01:12:52 PM »

Kovid will be off the mill today, just a little dental work remaining.

Using a 1/32 ball mill for more detail on the front teeth.

Cutter · « **Reply #27 on:** May 27, 2020, 03:13:20 PM »

Kovid , made from the same material as Yoda

bruski · « **Reply #28 on:** May 27, 2020, 07:07:31 PM »

Kovid sure is a horny guy.

Cutter · « **Reply #29 on:** May 29, 2020, 08:12:44 PM »

My grandson has taken over my small 4 axis CNC mill

Heâ€™s going to practice on a RG-G Cam next week

The boy cut his first cam today, but said it

was boring. guess he likes the fantasy stuff.

Larryx · « **Reply #30 on:** May 29, 2020, 09:44:17 PM »

Looks better than the one that I made.

Cutter · « **Reply #31 on:** May 30, 2020, 09:57:16 AM »

The boy cut his first cam today, but said it

was boring. guess he likes the fantasy stuff.

Not very exciting

maccrazy2 · « **Reply #32 on:** May 30, 2020, 10:40:12 AM »

Jerry, what rpm are you turning the cutter? No coolant?

Cutter · « **Reply #33 on:** May 30, 2020, 12:00:07 PM »

Jerry, what rpm are you turning the cutter? No coolant?

3000 rpm @16. ipm

9 roughing passes of .020 each with a 3/16 4 flute carbide.

Finish with the same tool at .250 deep.

I never use liquid coolant , air sometimes

Cutter · « **Reply #34 on:** May 31, 2020, 10:54:44 AM »

ISOLATION

Cutter · « **Reply #35 on:** June 10, 2020, 07:12:17 PM »

It seem like the system has figured out how to

correct the social security deficit

Cutter · « **Reply #36 on:** June 12, 2020, 01:38:56 PM »

Donâ€™t forget your red jacket

when Blanchard grinding

News: