Jump to content


Photo

HELP NEED FOR NEW GATLING GUN PROJRCT


  • Please log in to reply
3 replies to this topic

#1 capteod

capteod

    Newbie

  • Members
  • Pip
  • 1 posts

Posted 05 February 2010 - 12:24 AM

I need 5 or 6 Barrel blanks for my new .357 MAXIMUM Bulldog Gatling Gun model 1877. OD must cleanup at 1.000 and each barrel should be 10 inches long. These can be 9mm or 357 as I handload and will adjust the powder if the barrel is .354 in lieu of .357.

I am also looking for a source for a piece of brass or bronze tube 4.500"ID x 5.00"OD that is 27" Long. If necessary I will have it cast if there is a foundry that does small runs, 1 to 3 pieces. This gun will be mounted on the tripod and will look like the one on page 79 of Wahl & Toppel book "THE GATLING GUN".

My plan is to make the gun with a bruce feed.


#2 Guest_Dave_*

Guest_Dave_*
  • Guests

Posted 05 February 2010 - 12:33 AM

These people have the brass you need... http://www.lewisbrass.com/rbt.htm

Pieces up to 10 3/8 dia.

#3 gatguy

gatguy

    Advanced Member

  • Members
  • PipPipPip
  • 36 posts
  • LocationColville Washington state

Posted 10 February 2010 - 05:03 PM

Check with Numrich Arms, they had .38 barrels and/or liners in short lengths.
Dick C.
:)
Dick C. (gatguy)

#4 jarhead jim

jarhead jim

    Advanced Member

  • Members
  • PipPipPip
  • 55 posts
  • LocationBartley, Nebr.

Posted 11 February 2010 - 01:16 AM

Green Mountain has what you're looking for. 1" OD and 11" long.

Jim




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users