Jump to content


Photo

Trunion and Trunion cover


  • Please log in to reply
2 replies to this topic

#1 Larryx

Larryx

    Advanced Member

  • Members
  • PipPipPip
  • 80 posts
  • LocationSouth Florida

Posted 14 June 2020 - 05:53 PM

This is probably obvious to the most casual observer but it appears to these eyes that there is a missing feature on sheet 5 of 5  on the view showing the side view of the trunion/yoke feature.

 

The view above shows the trunion lock positioned in the center of the trunion cover. The view below shows a 0.187 hole for the lock pin. There appears to be no accommodation to allow the cover lock to be inside the piece below it. 

 

What am I missing?



#2 Cutter

Cutter

    Advanced Member

  • Members
  • PipPipPip
  • 1158 posts

Posted 14 June 2020 - 08:35 PM

This is probably obvious to the most casual observer but it appears to these eyes that there is a missing feature on sheet 5 of 5  on the view showing the side view of the trunion/yoke feature.

 

The view above shows the trunion lock positioned in the center of the trunion cover. The view below shows a 0.187 hole for the lock pin. There appears to be no accommodation to allow the cover lock to be inside the piece below it. 

 

What am I missing?

 

You are not missing it Larry.
The slot is missing in the trunnion on my drawing also.
Just do the math and cut that sumbitch

  • Roller and gbull like this

#3 Larryx

Larryx

    Advanced Member

  • Members
  • PipPipPip
  • 80 posts
  • LocationSouth Florida

Posted 14 June 2020 - 09:46 PM

Will do






0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users