length of pan
Posted 08 February 2012 - 01:21 AM
Posted 08 February 2012 - 02:23 PM
I increased the length of the pan, the bolt, firing pin, cams, housing and possibly other bits.
If you're thinking of doing a LR version, I could upload all the different component plans. Or, I have all the parts designed in CAD.
Let me know.
Posted 14 September 2012 - 07:28 PM
Posted 26 September 2012 - 11:00 AM
I've scanned in the original prints and added the modified dimensions to enable .22LR. Please note, that I havent finished my build yet, so no idea it it will work. lol.
Ive got the whole GG done on CAD and everything seems to fit.
As well as redesigning for LR, I've had to redesign to fit in with the UK firearms laws which are basically a minimum overal length of 24" and minimum barrel length of 12".
I'm only linking through to the LR modifications at this time - they can be found here which is in the pictures section of this site.http://www.gatlinggu...87&p=2216#p2216
There are a few other changes needed:
Top cover: the front surface needs extending 7.9mm. The hole that the round drops through needs extending 7.9mm as well.
The barrels need to be chambered accordingly.
I've asked Dave to allow STL files, and I'll upload them as well for those that use CAD.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users