Jump to content


Photo

SX3 Conversion


  • Please log in to reply
7 replies to this topic

#1 1hand

1hand

    Advanced Member

  • Members
  • PipPipPip
  • 51 posts
  • LocationWisconsin

Posted 22 December 2011 - 01:19 AM

Here is my SX3 Fusion conversion.

No turning back now! :o

Posted Image
Posted Image
Posted Image

Removed the table, saddle, and the Z axis drive and lead screw. Ready for the Ball screws and mounts.

Matt

#2 1hand

1hand

    Advanced Member

  • Members
  • PipPipPip
  • 51 posts
  • LocationWisconsin

Posted 22 December 2011 - 01:28 AM

Here is the Soigeneris control box.
Posted Image

A shot of the G540
Posted Image

Inside houses the MeanWell 320W 48V Power Supply with its own fan.
Posted Image

This control box is built like a tank. I am tickled pink with the craftsmanship of the entire controller.

Matt

#3 1hand

1hand

    Advanced Member

  • Members
  • PipPipPip
  • 51 posts
  • LocationWisconsin

Posted 22 December 2011 - 01:29 AM

Here we got the 20 AWG stepper motor cables with the db9's attached.
Posted Image

A db9 connector rigged up for 2 external E-stops, 1 by the Mill, and 1 by the Lathe.
Posted Image

A 3K resistor for the Nema 34.
Posted Image

Some limit switches.
Posted Image

Matt

#4 1hand

1hand

    Advanced Member

  • Members
  • PipPipPip
  • 51 posts
  • LocationWisconsin

Posted 22 December 2011 - 01:31 AM

Being the computer is placed in between the two machines, I got something that's a bit more mobile than the key board for jogging.
Posted Image


Matt

#5 1hand

1hand

    Advanced Member

  • Members
  • PipPipPip
  • 51 posts
  • LocationWisconsin

Posted 22 December 2011 - 01:33 AM

Got a few things soldered and wired up today anyway.
Posted Image
Posted Image
Posted Image
Posted Image

Matt

#6 1hand

1hand

    Advanced Member

  • Members
  • PipPipPip
  • 51 posts
  • LocationWisconsin

Posted 22 December 2011 - 01:40 AM

Some progress:

The Z ballscrew
Posted Image
Posted Image
Posted Image

Posted Image
Posted Image
Posted Image
Posted Image

Matt

#7 1hand

1hand

    Advanced Member

  • Members
  • PipPipPip
  • 51 posts
  • LocationWisconsin

Posted 22 December 2011 - 01:42 AM

X and Y

Posted Image
Posted Image
Posted Image

Matt

#8 1hand

1hand

    Advanced Member

  • Members
  • PipPipPip
  • 51 posts
  • LocationWisconsin

Posted 22 December 2011 - 01:52 AM

Here is the mill making some loco parts with videos
Made a milling jig
Posted Image
Milling video
Posted Image

Posted Image
Posted Image

Machining Video
Posted Image

Posted Image

Posted Image

Matt




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users