Jump to content


Photo

Oscillator question


  • Please log in to reply
2 replies to this topic

#1 my65pan

my65pan

    Advanced Member

  • Members
  • PipPipPip
  • 102 posts

Posted 22 August 2011 - 10:44 PM

I'm working on the components for my oscillator. The drawing 5200-2 shows the oscillator body(part C) reamed 15/32" X 1.950 deep for the lock body. The drawing 5200-3 shows the oscillator adjusting screw is 2.250 long at the 5/16"-24 threaded end so it's too long to fit under the cap. Should I assume there should be 5/16" X 2.250 deep bore at the bottom of the 15/32" bore?

#2 my65pan

my65pan

    Advanced Member

  • Members
  • PipPipPip
  • 102 posts

Posted 25 August 2011 - 12:57 AM

Nevermind, I sorted it out.

#3 DonV

DonV

    Newbie

  • Members
  • Pip
  • 8 posts

Posted 28 February 2013 - 11:38 PM

1/2 x 32 bottoming taps and dies are REALLY expensive. Any problem switching to say 1/2 x 28, cause taps are cheap!
Don V




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users